Jeff's Review of Suspension Techniques Anti-Sway Bar

---

Name: Jeff
Email: [email protected]
Product: Suspension Techniques anti-sway bar
Model:
Store: www.shox.com
Price: $240
Car: Nissan 240SX base '95
Worth_it: Yes
Difficulty_Rating: 4
Date: April 04, 2000

Problems

Base model S14 240SX's have no rear anti-sway bars from the factory, so you'll need to buy yourself the following bolts/nuts: Four M10 x 1.25 x 30mm hex head cap screw Four M10 x 1.25 nuts and a whole stackload (about 2" worth) of washers.

The bolts in the front won't be a problem - just reuse the ones that were on there.

Tips

The thread on the endlinks will bottom out before the bushings are tight, so stack on the washers.

Don't forget to slather on the white grease that they supply.

The rear bar will be hard to fit in, but there's a gap in front of the gas tank you can use when you slide the bar in.

Thoughts

Handling is much improved, cornering is flatter, much less understeer. This will inspire confidence in the corners.

Other

The installation is straightforward, but it's a pain if you've only got tiny little jackstands.