Jeff's Review of Apex-I N1

---

Name: Jeff Smith
Email: [email protected]
Product: APEX'i N1 exhaust
Model: single
Store: max rev
Price: $375
Car: '93 coupe
Worth_it: Yes
Difficulty_Rating: 8
Date: March 11, 2000

Problems

the bolts at the cat. were completely rusted. i got one of them to come off after about 30 minutes of soaking it with wd-40. the other nut stripped, and i had to break the stud off with a pipe wrench. then i had to drill it out, and replace it with a bolt. i have read that you have to cut the rear tow hook off to make it fit, but i didn't have to do any cutting.

Tips

spray the bolts with wd-40 or something similar to it, and let it soak in for a while.

Thoughts

this exhaust makes a huge difference in top end. once your rev's get to about 4000, you will notice it pull way harder than the stock system. it looks great, with the huge 115 mm tip sticking out.

Other

i would highly recommend getting an intake system if you don't already have one. becuase you will need it to make up for the loss in low end with this 3 inch diameter cat back system